Adss Opgw Down Lead Clamp Opgw Down Lead Clamp Adss Opgw Rubber
Down Lead Clamp
1.For fiber optic cable connecting tower, tower cable lead terminal
and the middle under the arched part of the tension cable tower
fixed, each 1.5 meters with a set of general, other needs can also
use a fixed place.
2.The down lead clamp is used in the immobility of OPGW/ADSS on
pole.It is suitable for the riveting of fiber when jumping or down
lead.And it was commonly installed every 1.5 to 2 meter each
set.This clamp bears the excellence of easy installation,wide
adjustable range and suitable for different Diameter.
• Large range to regulate
• Proper spacing and hold strength without damage to the cable
• Install easily
• Easy, quick and reliable to install
It is installed to down-lead or jump-joint cables on terminal tower
/pole or splice joint tower/pole. it was commonly installed every
1.5- 2m / set.
two models optional: 10-14mm and 13-17mm.
materials: Parallel groove damp— ageing-resistant rubber or
Stainless steel hoop—Aluminum alloy support — Galvanized U-shaped
|Model||Structure type||available cable diameter (mm)||Quality (kg)||Remark|
|ZXOFC-0100||hot-dip galvanizing||6.9-10.0||0.8||Tower used|
|ZXOFC-0130||hot-dip galvanizing||10.1-13.0||0.8||Tower used|
|ZXOFC-0160||hot-dip galvanizing||13.1-16.0||0.8||Tower used|
|ZXOFC-0190||hot-dip galvanizing||16.1-19.0||0.8||Tower used|
|ZXOFC-0220||hot-dip galvanizing||19.1-22.0||0.8||Tower used|
|ZXOFC-0100||Steel Strip||6.9-10.0||0.55||Pole used|
|ZXOFC-0130||Steel Strip||10.1-13.0||0.55||Pole used|
|ZXOFC-0160||Steel Strip||13.1-16.0||0.55||Pole used|
|ZXOFC-0190||Steel Strip||16.1-19.0||0.55||Pole used|
|ZXOFC-0220||Steel Strip||19.1-22.0||0.55||Pole used|
Packing & Shipping