Adss Opgw Down Lead Clamp Opgw Down Lead Clamp Adss Opgw Rubber
Down Lead Clamp
Downlead clamps are used to guide optical ground wire (OPGW) from
the top of the structure to the splice box. AFL’s downlead clamps
install easily, provide proper
spacing and hold strength without damage to the cable. From poles
to towers, AFL offers a full line of OPGW downlead clamps to meet
the needs of any application.
- Slip strength: >100lbs.
- Lattice adapters provided with break-away bolts for precise torque
- Steel tower guide clamps available with adapters to eliminate the
need for drilling
- Banding adapters available
It is installed to down-lead or jump-joint cables on terminal tower
/pole or splice joint tower/pole. it was commonly installed every
1.5- 2m / set.
two models optional: 10-14mm and 13-17mm.
materials: Parallel groove damp— ageing-resistant rubber or
Stainless steel hoop—Aluminum alloy support — Galvanized U-shaped
|Model||Structure type||available cable diameter (mm)||Quality (kg)||Remark|
|ZXOFC-0100||hot-dip galvanizing||6.9-10.0||0.8||Tower used|
|ZXOFC-0130||hot-dip galvanizing||10.1-13.0||0.8||Tower used|
|ZXOFC-0160||hot-dip galvanizing||13.1-16.0||0.8||Tower used|
|ZXOFC-0190||hot-dip galvanizing||16.1-19.0||0.8||Tower used|
|ZXOFC-0220||hot-dip galvanizing||19.1-22.0||0.8||Tower used|
|ZXOFC-0100||Steel Strip||6.9-10.0||0.55||Pole used|
|ZXOFC-0130||Steel Strip||10.1-13.0||0.55||Pole used|
|ZXOFC-0160||Steel Strip||13.1-16.0||0.55||Pole used|
|ZXOFC-0190||Steel Strip||16.1-19.0||0.55||Pole used|
|ZXOFC-0220||Steel Strip||19.1-22.0||0.55||Pole used|
Packing & Shipping